Command List - Trycom Technology TRP-C29U User Manual

8. Command List

Command List
%IDNNPPBBDD(CHK)(cr)
#IDPPFD(CHK)(cr)
#IDN(CHK)(cr)
#IDCN(CHK)(cr)
#IDCW(CHK)(cr)
#IDCS(CHK)(cr)
$IDLS(CHK)(cr)
$IDC(CHK)(cr)
$ID6(CHK)(cr)
$ID2(CHK)(cr)
$IDRS(CHK)(cr)
$IDM(CHK)(cr)
$IDF(CHK)(cr)
$ID5(CHK)(cr)
~IDONN(CHK)(cr)
~IDLEDA(CHK)(cr)
~IDWENN(CHK)(cr)
~IDWD(CHK)(cr)
~IDWR(CHK)(cr)
~**(CHK)(cr)
~ID4V(CHK)(cr)
~ID5V(CHK)(cr)
#**(CHK)(cr)
$ID4(CHK)(cr)
*We offer the utility to guide you to configure the module; the utility is with on-line RS485
modules scanning and searching function. You can find the utility in the CD which bundled in
TRP-C29U standard package.
Function Description
Set the module's configuration
Digital output data
Read digital input N channel counter value
Clear digital input N channel counter value
Clear all digital input counters value
Save all digital input counters value to EEPROM
Read digital input latched
Clear digital input latched
Read digital input/output status
Read the TRP-C29U configuration
Read the module's name
Read the module's firmware version
Read the module reset status
Change the module's name
Set the module's LED operating mode
Enable watchdog and set the timeout value
Disable watchdog
Read watchdog timeout value
System stand by (Host OK!)
Read power on/safe value
Save current digital output status to power on or safe mode
Save current digital input status
Read synchronized data
Reset
Page Index
See 8-1 ~ 8-3
See 8-4
See 8-5
See 8-6
See 8-7
See 8-8
See 8-9
See 8-10
See 8-11
See 8-12
See 8-13
See 8-14
See 8-15
See 8-16
See 8-17
See 8-18
See 8-19
See 8-20
See 8-21
See 8-22
See 8-23
See 8-24
See 8-25
See 8-26
20