About This Product; Specifications; Features - NEC NE3390-160 User Manual

1. About This Product

1-1. Specifications

Fibre Channel interface
Fibre Channel link rate
PCI Express Connector
Physical dimensions
Weight
Operating voltage
Power consumption
Environmental
condition

1-2. Features

The NE3390-160 Fibre Channel Controller (2ch) is a Fibre Channel host bus adapter card. This
product has two Fibre Channel interface connectors.

Notice


Item
Operating
Storage
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-speed. For the best performance,
it is important to avoid your PCI Express bus becoming a bottleneck that will result
in slow data transfer. You can connect this product in more than X8 bandwidth PCI
Express 1.0 slot or more than X4 bandwidth PCI Express 2.0.
Specification
Short wave laser (LC connector) x 2
8Gbps,4Gbps
X8
68.9mm(W) x 167.6mm(D)
Under. 0.2kg
PCI Express 3.3V/12V
Typical 8.8W
Max 13.3W
Temperature 0 - 45 degrees C
Humidity 5 - 95 %
Temperature -40- 70 degrees C
Humidity 5 - 95 %
- 52 -
Remarks
SFP+ module x 2
Auto
Support
PCI Express 2.0
MD2
No condensation