Table of Contents
Advertisement
1. About This Product
1-1. Specifications
Item
Fibre Channel interface
Fibre Channel link rate
PCI Express Connector
Physical dimensions
Weight
Operating voltage
Power consumption
Environmental
condition
1-2. Features
This product is a Fibre Channel host bus adapt er card. This product has two Fibre Channel interface
connectors.
Notice
1-3. Before Using
In addition to documentation you receive with your Fibre Channel (FC) Host Bus Adapter
(HBA), you must review the NEC-specific FC HBA documentation and ensure that you have the
latest driver, firmware, and supplemental information.
Access to the NEC Web site (http://www.nec.com/express/).
N8190-167 Short wave laser (LC connector) x 1
N8190-168 Short wave laser (LC connector) x 2
32Gbps,16Gbps
x8
168mm(W) x 68mm(D)
Under. 0.2kg
PCI Express 12V
Typical
Max
Temperature
Operating
Humidity
Temperature -20- 70 degrees C
Storage
Humidity
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NE C Corporation. If the product is connected t o a comput er or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or s ervice cent er for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-s peed. For the best performance, it
is important to avoid your PCI Express bus becoming a bottleneck that will result in
slow data trans fer. You can connect this product in more than x8 bandwidth PCI
Express 3.0.
Specification
7.5W
9.5W
0 - 45 degrees C
10 - 90 %
5 - 95 %
- 36 -
Remarks
SFP+ module x1
SFP+ module x2
Auto
Support
PCI Express 3.0
MD2
No condensation
Advertisement
Table of Contents
