Table of Contents
Advertisement
1. About This Product
1-1. Specifications
Fibre Channel interface
Fibre Channel link speed
PCI Express Connector
Physical dimensions
Weight
Operating voltage
Power consumption
Environmental
condition
1-2. Features
The N8190-7153 Fibre Channel Controller (1ch) is a Fibre Channel host bus adapter card. This
product has a Fibre Channel interface connector.
Notice
Item
Short wave laser (LC connector)
8Gbps,4Gbps
X8
64.42mm(W) x 167.64mm(D)
Under. 0.2kg
PCI Express 3.3V/12V
Typical 5.9W
Max
Temperature 0 - 45 degrees C
Operating
Humidity
Temperature -40- 70 degrees C
Storage
Humidity
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-speed. For the best performance,
it is important to avoid your PCI Express bus becoming a bottleneck that will result
in slow data transfer. You can connect this product in more than X4 bandwidth slot.
Specification
9.6W
5 - 95 %
5 - 95 %
- 30 -
Remarks
SFP+ module
Support
PCI Express 2.0
No condensation
Advertisement
Table of Contents
