8> Select a Boot device.
Notice
When you have selected a device, you see a window to enter a starting number for the device's
LUNs like:
ALPA:B3(7D) WWPN:21000016 97122446
Enter two digits of starting LUN (Hex): 00
<ESC> to Previous Menu
9> Enter "00" (indicating LUN0) for the LUN starting number. Then, a window to select an LUN for the
device is displayed.
01: LPe12002-M8-N : Bus#: 60 Dev#: 00 Func#: 01
Mem Base: E7980000 Firmware Version : US2.01A12 Boot BIOS: Disabled!
Port Name: 10000090FA21128 Node Name: 20000090FA21128
Topology: Auto Topology: Loop First (Default)
ALPA:B3 SelectedID:7D WWPN:
01. LUN:00 NEC DISK ARRAY 1000
02. LUN:01 NEC DISK ARRAY 1000
10> Enter "01" (LUN00). Then, you see a window to select how to boot this device.
DID:0000B3 WWPN:21000016 97122446 LUN:00
Boot this device via WWPN
Boot this device via DID
<ESC> to Previous Menu
<↑/↓> to Highlight, <Enter> to Select
Make sure to select LUN 0 device for the Boot device.
Emulex LightPulse FC BIOS Utility. UB2.12a15
21000016 97122446
Enter <Esc> to exit <PageDn> to Next Page
<↑/↓> to Highlight, <Enter> to Select
Copyright (c) 1997-2014 Emulex. All rights reserved.
- 69 -