Dataman 448PRO2AP-AU User Manual page 47

Setup
DATAMAN 448PRO2AP
On picture bellow are overall dimensions of DATAMAN 448PRO2AP with programming
modules. Total height of programmer with installed programming modules depends of
programming module ZIF socket height. Total height can be determined by 68,5mm + ZIF
socket height.
Right top view to DATAMAN 448PRO2AP with dimensions
At X axis a center of ZIF is same with center of programming module, but at Y axis not. For a
lot of ZIFs, they center will be at the same position as on picture, but for some extra big ZIFs
center of ZIF will be moved at Y axis.
Notes:
Minimal distance between programmers must be:
 2+ cm in face to face configuration of programmers
 5+ cm in tail to face configuration of programmers
47