Connection - Factory Head Unit And Monitor; Connection - Picture Signal Cable - Car-Interface CI-RL3-LR16-8 Manual

2.3. Connections to factory head-unit and monitor

2.3.1. Connection - picture signal cable

2.3.1.1. INCONTROL TOUCH head unit and 8inch monitor (RL3-LR16-8)
Disconnect the factory picture signal cable's purple coloured female HSD+2 connector from
the rear-side of the head unit and connect it to the waterblue coloured HSD+2 connector
„TO LCD" of the video interface .
Connect the not angled aubergine coloured female HSD+2 connector of the enclosed picture
signal cable to the previously become free purple coloured male HSD+2 connector of the
video interface.
Connect the female aubergine coloured HSD+2 connector opposite the picture signal cable
to the waterblue coloured male HSD+2 connector „HU IN" of the video interface.
Note: The colours of the HSD+2 connectors at monitor and head unit may vary.
Version 03.07.2020 HW CAM(V98)/(V16) CI-RL3-LR16-8/10