Table of Contents
Advertisement
3-1
Overview
There are several LEDs on the control panel as well as others on the hard drive
carriers to keep you constantly informed of the overall status of the system as well
as the activity and health of specific components. There are also two buttons on
the chassis control panel.
3-2
Control Panel Buttons
The two push-buttons located on the front of the chassis are (in order from left to
right) a reset button and a power on/off button.
Reset
Use the reset button to reboot the system.
Power
This is the main power button, which is used to apply or turn off the main system
power. Turning off system power with this button removes the main power but keeps
standby power supplied to the system. Therefore, the system power cord should
be unplugged before performing service.
3-3
Control Panel LEDs
The control panel located on the front of the chassis has six LEDs, which provide
you with critical information related to different parts of the system. This section
explains what each LED indicates when illuminated and any corrective action you
may need to take.
Chapter 3
System Interface
3-1
Chapter 3: System Interface
Advertisement
Table of Contents
