Starter Transmission - Yamaha TT600RE 2004 Service Manual

INSPECTION AND REPAIR

STARTER TRANSMISSION

1. Check:
•
Starter clutch functioning (1).
Turn the clutch in the direction indicated
by the arrow.
Irregular functioning/Damage
the clutch.
•
Install the starter rim on the gear and hold
the gear firm.
•
When turning the gear rim in a clockwise
direction (A), the gear and rim must be
meshed. Otherwise, the gear is faulty and
must be replaced.
•
When the gear rim is turned in a anti-
clockwise direction (B), it must turn freely.
Otherwise, the gear is faulty and must be
replaced.
2. Inspect:
•
Starter neutral gear teeth (1)
•
Starter neutral gear teeth (2)
•
Starter rim teeth (3)
Burrs/Shavings/Roughness/Wear
Replace.
3. Inspect:
•
Starter rim (contact surfaces)
Pitting/Wear/Damage
5-38
ENG
Replace
Replace.