*
5. Starter circuit cut-off relay.
•
Connect the pocket tester (DC 20V) and
the battery (12V) to the cut-off relay con-
nector terminal of the starter circuit.
Battery terminal (+)
White/Black terminal (1)
Battery terminal (–)
Tester terminal (+)
Brown terminal (3)
Tester terminal (–)
Earth
•
Turn the main switch to ON.
•
Check
the
voltage
"Brown/Blue" and "Brown" cable to the
connector terminal of the starter circuit
cut-off relay.
6. Harness connections.
•
Check the connections of the entire light
system.
Check the conditions of each circuit for the
entire light system.
See the "ELECTRIC CIRCUIT DIAGRAM".
Black terminal (2)
(12V)
on
the
IN COMPLIANCE WITH
SPECIFICATIONS (12V)
CORRECT
LIGHT SYSTEM
DISCONTINUITY
The starter circuit cut-off relay is defective.
Replace.
DEFECTIVE CONNECTIONS
Repair.
7-45
ELEC