Yamaha TT600RE 2004 Service Manual page 168

7
6
4
5
2
6
7
3
4
1
3
3
4
2
4-53
FRONT FORK
9. With a few sharp blows withdraw the inner
tube (2) from the outer tube (3).
NOTE:
The oil seal (4), the washer (5), the outer tube DU
bush (6) and the inner tube DU bush (7) are
installed on the inner tube and must be removed
and replaced with new one.
10. Install:
•
Outer tube DU bush (6) (new)
•
Inner tube DU bush (7) (new)
CAUTION:
Check that the inner tube bush (7) is inserted
correctly in its seat on the end of the inner
tube.
11. Mount the tool (1) on the inner tube (2) with the
side (3) matching the DU outer tube bush (4)
and clamp it keeping the two joints (5) at the
top and bottom (never towards the jaws of the
vice) and make it protrude by at least 40 mm
at the sides.
DU bush/oil seal driver (1):
90890-11043
CHAS