Siruba 700LX Original Instruction Book page 19

2. 依本機所附桌板裁製圖及零件組合圖所列之
配件，依序安裝防震基座 ②。 ( 圖 8)
3. 裝置導布屑及線架。( 圖 9)
2. Please refer to the attached table cut-
out diagram and the parts list to orderly
assemble the cushion Foundation ② .
(Fig.8)
3. Assemble the waste disposal set and the
thread stand. ( Fig.9)
Introduction
圖 8 / Fig. 8
圖 9 / Fig. 9
P15