Dry Operation; Timer Setting; Timer On And Timer Off Both - Carrier KJR-12B/DP-E Owner's Manual

3. Press "FAN SPEED" button to select
high/mid/low/auto.
4. Press "ON/OFF" button, indoor unit
operation lamp on, it works in selected
mode. Press "ON/OFF" button again, it
stops to work.
Remark: When
temperature can be set.

DRY OPERATION

1. Press " MODE " button, select " DRY "
mode.
2. Press temperature adjust button to
select setting temp.
3. Press " ON/OFF " button, indoor unit
operation lamp on, it works in dry mode.
Press ON/OFF button again, it stops to
work.
4. In dry mode, economy operation and
fan speed are ineffective.

TIMER SETTING

Timer on only:
1. Press " TIME ON " button, it display
"SET" on LCD, and display " H " and
"ON" , it is waiting for timer on setting.
in fan mode,
2. Press " timer " on button repeatedly to
adjust time setting.
3. If press this button and hold on, the
time will increase at 0.5h, after 10h, it
increase at 1h.
4. After setting 0.5 second, the wire
no controller send timer on information, it is
finished.
Timer off only:
1. Press "TIME OFF " button, it display
"SET" on LCD, and display " H " and ON,
it is waiting for timer on setting.
2. Press "TIME OFF" button repeatedly
to adjust time setting.
3. If press this button and hold on , the
time will increase at 0.5h, after 10h, it
increase at 1h.
4. After setting 0.5 second, the wire
controller send timer off information, it is
finished.

TIMER ON AND TIMER OFF BOTH

1. Set
corresponding step1 and 2.
2. Set
corresponding step1 and 2.
timer on time
timer off time
as the
as the
9