Lexmark B2865dw User Manual page 84

Understanding the printer menus
Menu item
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Note: This menu appears only in some printer models.
Menu item
PCL SmartSwitch
Off
On*
PS SmartSwitch
Off
On*
Job Buffering
Off*
On
Mac Binary PS
On
Auto*
Off
Enable USB Port
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Google Cloud Print
Menu item
Registration
Register
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the packet size for data transmission.
Description
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch to PS emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Temporarily store jobs on the printer hard disk before printing.
Note: This menu item appears only when a hard disk installed.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
When set to On, the printer processes raw binary PostScript print jobs
from computers using the Macintosh operating system.
•
When set to Auto, the printer processes print jobs from computers using
either Windows or Macintosh operating systems
•
When set to Off, the printer filters PostScript print jobs using the standard
protocol.
Enable the standard USB port.
Description
Register the printer to the Google Cloud Print server.
84