UTStarcom F1000G Manual page 59

4.5.2.1 Authentication
WiFi-Settings WiFi Config Authentication
This option enables you to set the WiFi authentication mode. When you
highlight this option, the current setting will be displayed in the adjacent
bubble
After accessing this option, you can select Null or Shared Key
4.5.2.2 SSID & WEP KEY
WiFi-Settings WiFi Config SSID & WEP KEY
This option enables you to set SSIDs and WEP keys for connection
profiles. Each time you switch on the phone, the phone will try to connect
to one of the corresponding APs (Access Points)
After you select this option, the connection profile list will be displayed. If a
connection profile has been set with a 64/128 bit WEP key, a lock icon will
be displayed in front of the connection profile
Press to highlight the desired connection profile, and then press the
left soft key
SSID
This option enables you to save an AP's SSID to the connection profile
After accessing this option, enter the SSID (32 alphanumeric characters
maximum), and then press the left soft key
operation
WEP Key
This option enables you to save the WEP key utilized by the AP to the
connection profile:
(Ok). The following options will be available:
(Ok) to complete the
Menu
53