UTStarcom F1000G Manual page 60

Menu
Null
Select this option to set the WEP key to null
64bit
Select this option to enter a 64bit WEP key. Edit the WEP key and press
the left soft key
Ensure that the WEP key consists of five ASCII characters or ten
hexadecimal characters
128bit
Select this option to enter a 128bit WEP key. Edit the WEP key and press
the left soft key
Ensure that the WEP key consists of 13 ASCII characters or 26
hexadecimal characters
Note: The corresponding AP need to select WEP Key 1 as the
default transmit key. Enter WEP Key 1 in the phone
The WEP key setting may be different due to AP settings
For a Linksys AP, a passphrase is used to generate four WEP keys
and WEP Key 1 need to be selected. In the phone, you should enter
WEP Key 1
If an AP supports only a fixed hexadecimal WEP key, you should
enter the same WEP key in the phone
If an AP supports both ASCII and hexadecimal WEP keys, you can
enter either the ACSII WEP key or the hexadecimal WEP key in the
phone
WEP Key Index
This option enables you to set the WEP key index for the connection
profile
After accessing this option, enter the WEP key index (0~3), and then
press the left soft key
54
(Ok) to complete the operation
(Ok) to complete the operation
(Ok) to complete the operation