Advertisement
Operation Instructions
Sliding Touch Panel (Fig. P6)
1.
Extractor fan on and off.
2.
Sliding touch panel for extractor fan speed control. Also used in combination with
the lighting button. In panels with TURBO (i) button, Turbo speed only will work for 5
minutes, once it runs out, the speed will decrease to 9th speed.
3.
Lighting on and off. Press the button and, while it is flashing, adjust the lighting
intensity using the sliding touch panel.
4.
Enable and disable extractor fan timer.
5.
Filter clean warning display/button. Warning of the need to replace the filter – press to
deactivate once the filter has been cleaned or replaced.
Timer: the extractor fan works for 2 minutes at the current speed and another 2 minutes at
each of the lower speeds until it stops and the lighting switches off.
Touch Panel TC5V (Fig. P7)
1.
Extractor fan on and off.
2.
Extractor fan speed - button: speed SILENT, 1, 2, 3 and TURBO. In panels with TURBO
(T) button, Turbo speed only will work during 5 minutes, once it runs out, the speed will
decrease to 3rd speed. Turbo speed only will work during 5 minutes, once it runs out,
the speed will decrease to 3th speed.
3.
Enable and disable extractor fan timer.
4.
Lighting on and off.
5.
Button to decrease the light intensity.
6.
Button to increase the light intensity.
Grease filter warning display / button. After cleaning or replacing the grease filter, press the
button to turn off the warning.
Timer: the extractor fan works for 5 minutes at the current speed and another 5 minutes.
at each of the lower speeds until it stops and the lighting switches off.
P.13
Advertisement
