Specifications - Avtech AVR-G1-B-P-EMRA-R5-RP-IM Instructions Manual

Model:
Amplitude:
Pulse width (FWHM) 2 :
Load impedance:
Output impedance:
Rise time (20%-80%):
Fall time (80%-20%):
PRF:
Duty cycle:
Polarity:
GPIB and RS-232 control
LabView Drivers:
Propagation delay:
Jitter (Ext trig in to pulse out):
Trigger required:
(External trigger modes)
Sync delay:
Sync output:
Gate input:
Monitor output:
Connectors:
Power requirements:
Dimensions (H x W x D):
Chassis material:
Mounting:
Temperature range:
-B suffix indicates IEEE-488.2 GPIB and RS-232 control of amplitude, pulse width or duty cycle (as appropriate), pulse repetition frequency, and
1)
delay (See http://www.avtechpulse.com/gpib).
2) When triggered externally, the pulse width can be set by the pulse instrument controls, or it may be set to track the input trigger pulse width.

SPECIFICATIONS

50 Ω (i.e., internal resistance in series with the output).
1 :
Check http://www.avtechpulse.com/labview
Synchronous or asynchronous, active high or low, switchable.
Provides an internal current monitor circuit whose measurements are
displayed on the front panel and can be queried digitally through the GPIB /
RS-232 ports. The current monitor will sense the output current at the end
of the pulse. Currents in the range of 0 to 250 mA can be measured
properly. (Higher currents will not damage the monitor, but they will not be
reported properly.) Measurement accuracy: +/- 10%.
100 mm x 430 mm x 375 mm (3.9" x 17" x 14.8")
cast aluminum frame and handles, blue vinyl on aluminum cover plates
Any. Add the suffix -R5 to the model number to include a rack-mount kit.
AVR-G1-B-P-EMRA-R5-RP-IM
0 to +240 Volts
3 us to 30 us
≥ 1.6 kΩ, ≤ 900 pF.
150 mA maximum output current.
≤ 10 ns, into a resistive load
≤ 20 ns, into a resistive load
1 Hz to 10 kHz
30% maximum
Positive
Standard on -B units
≤ 100 ns (Ext trig in to pulse out)
± 100 ps ± 0.03% of sync delay
Mode A: + 5 Volt, > 50 ns (TTL)
Mode B: + 5 Volt, PW
IN
Variable, 0 to ± 1 second
+ 3 Volts, 100 ns, will drive 50 Ohm loads
Suppresses triggering when active.
SYNC: BNC, front panel
All others: BNC, rear panel
100 - 240 Volts, 50 - 60 Hz
+5°C to +40°C
1
for availability and downloads
= PW (TTL)
OUT
6