Table of Contents
Advertisement
6. Shutter and Drive Settings
Recording with [4K Burst]
1
Select [
] ([4K Burst]).
2
Press the shutter button halfway.
3
Press and hold the shutter button fully for as long as
you want to perform recording.
A Available recording time
•
Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
•
A 4K burst file will be recorded while the shutter button is
pressed and held.
•
If you are using Auto Focus, [Continuous AF] will work during recording. Focus will be
adjusted continuously.
•
The shutter sound will be heard repeatedly while recording.
•
When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display the
recording screen.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P191.
•
When the ambient temperature is high or continuous [
the camera may display [
cools down.
•
If you remove your finger from the shutter button immediately after the start of recording, up to
a period of approximately 1.5 seconds after the moment that the finger has been removed may
be recorded.
(P185)
] and stop the recording to protect itself. Wait until the camera
188
25 p
] ([4K Burst]) recording is performed,
4:3
AFS
AFS
4K
0
29
29 29
59
59 59
m
m
s
s
A
Advertisement
Table of Contents
