Table of Contents
Advertisement
6. Shutter and Drive Settings
Recording with [4K Pre-Burst]
1
Select [
] ([4K Pre-Burst]).
•
If you press the shutter button halfway, the aperture value
and shutter speed will be displayed.
2
Press the shutter button fully.
A Number of recordings that can be made
•
Recording of a 4K burst file will be performed for
approximately 1 second before and after the moment that
the shutter button is pressed.
•
The shutter sound will be heard only once.
•
When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display the
recording screen.
Recording tips
Focus and exposure
Auto Focus adjusts focus continuously, and except in Manual Exposure Mode, it
also adjusts exposure continuously.
•
Focus cannot be adjusted at the desired timing by pressing the shutter button
halfway or operating other controls.
•
In situations where you want to lock focus and exposure, such as when the subject
is not at the centre, use [AF/AE LOCK].
Battery drainage and camera temperature
When the drive mode is set to 4K Photo and [4K PHOTO] is set to [
([4K Pre-Burst]), the battery drains faster and the camera temperature rises.
•
Select [
] ([4K Pre-Burst]) only when recording.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P194.
•
When the drive mode is set to 4K Photo and [4K PHOTO] is set to [
camera temperature rises. In some cases, the camera may display [
Burst]), and disable the recording function to protect itself. Wait until the camera cools down.
•
When recording with [
recording with the normal recording screen.
(P185)
(P171)
] ([4K Pre-Burst]), images may not be displayed as smoothly as when
190
4:3
AFS
AFS
25 p
4K
0
1200
1200
1200
3.5
3.5
1000
1000
A
]
] ([4K Pre-Burst]), the
], switch to [
] ([4K
Advertisement
Table of Contents
