5. 4K Photo and Drive Settings
Recording with [4K Burst]
1
Select [
] ([4K Burst]).
A Available recording time
2
Press the shutter button halfway.
3
Press and hold the shutter button fully for as long
as you want to perform recording.
•
Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
•
A 4K burst file will be recorded while the shutter button is
pressed and held.
•
If you are using Auto Focus, [Continuous AF] will work during recording. Focus will be
adjusted continuously.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P126.
•
If you remove your finger from the shutter button immediately after the start of recording, up to
a period of approximately 1.5 seconds after the moment that the finger has been removed may
be recorded.
Recording with [4K Burst(S/S)]
1
Select [
] ([4K Burst(S/S)]).
A Available recording time
2
Press the shutter button fully.
•
Recording will start.
•
If you are using Auto Focus, [Continuous AF] will work
during recording. Focus will be adjusted continuously.
3
Press the shutter button fully again.
•
Recording will stop.
Recording tips
Adding markers to select and save pictures
You can add markers if you press [Fn1] during recording. (Up to 40 markers per
recording) When selecting and saving pictures from a 4K burst file, you can skip
to the positions where you added markers.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P126.
(P118)
(P118)
121
4:3
AFS
AFS
60 p
4K
0
5
5
04 04
04
m
m
s
s
R
R
A
4:3
AFS
AFS
60 p
4K
0
5
5
04
04 04
m
m
s
s
R
R
A