11. Using the Wi-Fi function
Wi-Fi function
Before Use
∫
•
Set the date and time settings in advance.
•
To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
About the Wi-Fi connection lamp
∫
Lit blue:
The Wi-Fi connection is on standby
Blinking blue:
Sending/receiving data through the Wi-Fi connection
About the [Wi-Fi] button
∫
In these operating instructions, a function button to which [Wi-Fi] is
assigned is referred to as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to
[Fn6].)
•
Refer to
P70
for details about the function button.
To start up the Wi-Fi function:
1 Touch [ ].
2 Touch [
].
Fn6
Pressing [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this
unit is displayed.
(P295)
•
You can select the following items by pressing [DISP.].
(You can also display the same menu by performing the following
operations:
>
[Setup] > [Wi-Fi] > [Wi-Fi Function]. )
MENU
[New Connection]
[Select a destination from History]
[Select a destination from Favorite]
•
These operating instructions describe the procedure for [New Connection].
(P41)
(P332)
(P332)
291
Fn6
Fn7
Fn8
Fn9
SNAP
Fn10