Table of Contents
Advertisement
5. Focus and Brightness (Exposure) Settings
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
The [
]/[Fn1] button can be used in two ways, as [
[Fn1] (function 1). At the time of purchase, the button is set to [
•
For details on the function buttons, refer to P70.
1
Press [
].
2
Rotate the rear dial to compensate the
exposure.
A Exposure Compensation value
B Flash Adjust
Underexposed
Compensate the exposure
towards positive.
•
You can switch the functions between the rear dial and the front dial by pressing [DISP.].
•
The Exposure Compensation value can be set within a range of j5 EV to i5 EV.
When recording motion pictures, the Exposure Compensation value can be set within a
range of j3 EV to i3 EV.
When recording 4K photos, the Exposure Compensation value can be set within a
range of j3 EV to i3 EV.
•
Select [0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
•
This operation is possible only when [Firing Mode]
•
Flash output can also be adjusted using [Flash Adjust.] in [Flash] in the [Rec] Menu.
(P237)
] (exposure compensation) or
Properly exposed
(P233)
173
].
Fn1
+1
+1
- 5 - 5 - 4 - 4 - 3 - 3 - 2 - 2 - 1 - 1 0 0
+1 +1 +2 +2 +3 +3 +4 +4 +5 +5
0 0 0
+5
+5
+5
A
Overexposed
Compensate the exposure
towards negative.
in [Flash] is set to [TTL].
0
B
Advertisement
Table of Contents
