Recording With [4K Burst]; Recording With [4K Burst(S/S)] - Panasonic Lumix DMC-FZ300 Owner's Manual For Advanced Features

Recording with [4K Burst]

1
Select [ ] ([4K Burst])
2
Press the shutter button halfway
3
Press and hold the shutter button fully for as long as you want to perform
recording
• Recording will start approximately 0.5 seconds after you press the shutter button fully. Therefore,
press the button fully as soon as possible.
• A 4K burst file will be recorded while the shutter button is pressed and held.
• If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted
continuously.
• For information on how to select and save pictures from recorded 4K burst files, refer to (→169).
●
If you remove your finger from the shutter button immediately after the start of recording, up to a
period of approximately 1.5 seconds after the moment that the finger has been removed may be
recorded.

Recording with [4K Burst(S/S)]

1
Select [ ] ([4K Burst(S/S)])
2
Press the shutter button fully
• Recording will start.
• If you are using Auto Focus, continuous AF will work while
recording. Focus will be adjusted continuously.
3
Press the shutter button fully again
• Recording will stop.
Recording tips
Adding markers to select and save pictures
When you press the [Fn2] button while recording, you can add a marker. (Up to
40 markers for each 4K burst file.) When selecting and saving pictures from a 4K burst
file, you can skip to the positions where you added markers.
• For information on how to select and save pictures from recorded 4K burst files, refer to (→169).
167
(→164)
(→164)
Shutter and Drive Settings
Recording 4K Photos
60 p
Available recording time
60 p
Available recording time
SQW0419