Table of Contents
Advertisement
13. Others
The recorded picture looks rough.
Noise appears on the picture.
•
Try the following:
> Take pictures in bright places.
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
> Set the [Long Shtr NR] to [ON].
•
Is the [Picture Size]
•
Is the [Digital Zoom] set?
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera's
pickup sensors.
This is not a malfunction.
•
Are you taking pictures with the electronic shutter?
> When using the electronic shutter, lowering the shutter speed may
reduce the effect of the horizontal stripes.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may
change or horizontal striping may appear on the screen.
Bright spot not in subject is recorded.
•
There may be defective pixels in the image sensor.
> Perform [Pixel Refresh] (P81).
Subject cannot be locked.
(AF tracking not possible)
•
Set the AF area to the distinctive colour of the subject if there is a part that is different from the
surrounding colour.
(P175)
(P145)
(P140)
or the [Quality]
(P227)
(P154)
(P131)
(P141)
set low?
(P179)
389
Advertisement
Table of Contents
