Table of Contents
Advertisement
6. Shutter and Drive Settings
Selecting and saving pictures on the TV screen
∫
Preparation: Set [HDMI Mode (Play)]
•
When connecting to a TV that does not support 4K motion picture, select [AUTO].
Connect the camera and a TV with an HDMI micro cable, and display the
playback screen.
•
To select and save pictures when the camera is connected to a TV with an HDMI micro cable,
set [VIERA Link] in [TV Connection] to [OFF].
•
If you connect the camera to a TV with an HDMI micro cable or AV cable (optional) and display
4K burst files on the TV, they will be displayed only on the 4K burst playback screen.
•
Even if you insert the card to a 4K-compatible TV with an SD card slot, you cannot play back
4K burst files recorded with
connect the camera and a 4K-compatible TV with an HDMI micro cable.
•
Depending on the TV to be connected, 4K burst files may not be played back correctly.
•
When there are too many image files, the currently retrieving information icon ([
[
]) may be displayed on the playback screen for a long period of time. In this case, you
cannot play back 4K burst files recorded with the 4K Photo function. Wait until the icon
disappears.
•
If you touch the slide view screen or 4K burst playback screen twice, the screen will be
enlarged. To return to the original display, touch the enlarged screen twice.
•
To select and save pictures from 4K burst files on a PC, use the software "PHOTOfunSTUDIO"
on the supplied DVD. Please note that it is not possible to edit a 4K burst file as a motion
picture.
•
4K burst files recorded on other devices may not be played back correctly on this unit.
(P78)
(P341)
set to an option other than [
[Aspect Ratio]
to [AUTO] or [4K].
195
].
16:9
To play them back,
(As of May 2015)
] or
Advertisement
Table of Contents
