Recording With [4K Burst] - Panasonic LUMIX DMC-TZ82 Operating Instructions Manual

Table of Contents

Advertisement

Recording with [4K Burst]

1
Select [
] ([4K Burst])
2
Press the shutter button halfway
3
Press and hold the shutter button fully for as long as you want to perform
recording
• Recording will start approximately 0.5 seconds after you press the shutter button fully. Therefore,
press the button fully as soon as possible.
• A 4K burst file will be recorded while the shutter button is pressed and held.
• If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted
continuously.
• For information on how to select and save pictures from recorded 4K burst files, refer to (→190).
Recording stops when the continuous recording time exceeds 15 minutes.
When you are using an SDHC memory card, you can continue recording without interruption even
if the file exceeds 4 GB, but the motion picture file will be recorded and played back in separate
files.
If using an SDXC Memory Card, you can record a motion picture in a single file even if the size is
greater than 4 GB.
If you remove your finger from the shutter button immediately after the start of recording, up to a
period of approximately 1.5 seconds after the moment that the finger has been removed may be
recorded.
187
(→184)
Recording 4K Photos
Recording 4K Photos
50
p
Available recording time
DVQP1246

Advertisement

Table of Contents
loading

Table of Contents