Caller List - Panasonic KX-TG7893AZ Operating Instructions Manual

2
MbN: "Group" a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
MbN: Select the desired ringer tone. a
MSAVEN
5
MOFFN

Caller list

Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit's date and time setting
is correct (page 17).
Viewing the caller list and calling
back
n Using a cellular line
Handset
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press MSELECTN.
To exit, press MOFFN.
4
MCELLN
R The unit starts dialling when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 21).
5
MbN: Select the desired cellular phone. a
MSELECTN
Base unit
1
MCIDN
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press MCELL 1N or MCELL
2N.
To exit, press MEXITN.
n Using the landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press M
– To exit, press MOFFN.
Base unit:
– To call back, press MZN.
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, " " is displayed, even if it was
viewed or answered using another unit.
R In step 2 for handset or step 2 for base unit,
if is displayed, not all of the information is
shown. To see the remaining information:
Handset:
Press MEN.
To return to the previous screen, press MFN.
Base unit:
Press M N.
To return to the previous screen, press
M N.
R or indicates the caller information
was received from the cellular line.
R If you do not want to dial the area code
when making landline calls from the caller
list, you can store the area code which you
want the unit to delete automatically
(page 49).
Storing an area code to be
deleted automatically (for
landline call)
In some situations, phone numbers stored
automatically in the caller list (page 49) will
include area codes. If you do not want to dial
the area code when making landline calls from
the caller list, you can store the area code
which you want the unit to delete automatically.
Example: You have stored the area code
"09". If you make a landline call from the caller
Caller ID Service
N.
49