Table of Contents
Advertisement
Programming
Special programming
Storing an area code to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 20) will include area codes. If you
do not want to dial the area code when
making calls from the caller list, you can
store the area code which you want the
unit to delete automatically.
Example: You have stored the area
code "123". If you make a call from the
caller list to the phone number "123-456-
7890", the unit dials "456-7890".
1
{j/OK}
2
{V}/{^}: "Base Unit Setup" i
{j/OK}
3
{V}/{^}: "Area Code" i
{j/OK}
4
Enter an area code (5 digits max.).
i {j/OK} i {ic}
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
{j/OK}
2
{V}/{^}: "Base Unit Setup" i
{j/OK}
18
3
{V}/{^}: "Repeater Mode" i
{j/OK}
4
{V}/{^}: Select the desired setting.
i {j/OK} i {ic}
Note:
L After turning the repeater mode on or
off, w flashes on the handset
momentarily. This is normal and the
handset can be used once w stops
flashing.
Advertisement
Table of Contents
