Getting Started – Attaching a Lens
Attaching a Lens
Attaching a Lens Hood: 63
≥
The camera can use the dedicated lenses that comply with the Micro Four
Thirds™ system lens mount specification (Micro Four Thirds mount).
For information about the lens that can be used
Used:
23)
•
Check that the camera on/off switch is set to [OFF].
•
Change the lens in a location where there is not a lot of dirt and dust.
If dirt or dust gets on the lens
•
Change the lens while the lens cap is attached.
(Dirt on the Image Sensor:
60
(Lenses That Can Be
756)