Attaching a Lens
• Make sure that the camera is turned off.
• Change the lens in a location where there is not a lot of dirt and dust. If dirt
or dust gets on the lens, refer to page 475.
• Change the lens while the lens cap is attached.
• When attaching or detaching the interchangeable lens (H-FS12032), retract
the lens barrel.
Align the lens fitting marks
then rotate the lens in the direction of the arrow.
●
Attach the lens by rotating it until it clicks.
1
• Insert the lens straight in.
Inserting this at an angle to attach it may damage the camera lens mount.
on the lens and camera and
2
2. Getting Started
41