Replacing The Microsd Card; Figure 25: Secure The Battery Cover - Motorola TC55CH User Manual

34 | Getting Started

Figure 25: Secure the Battery Cover

11 Press the Power button to turn on the TC55.

Replacing the microSD Card

Caution:
For proper electrostatic discharge (ESD) precautions to avoid damaging the SD card. Proper ESD
precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
Changing the microSD card can change the functionality of the TC55.
Ensure that you follow the procedures to shut down the TC55 before replacing the microSD card. Data
corruption can occur if reading or writing to the microSD card and power is removed.
Note: The TC55 supports microSD cards up to 32 GB.
To replace the microSD card:
Procedure:
1 Press the Power button until the menu displays.
2 Touch Power off.
3 Touch OK.
4 Wait for the device to power off completely.
5 Remove the battery cover.
6 Remove the battery.
7 Slide the microSD card cover up to unlock.
Send Feedback | February 2014 | MN000xxxA01