Pairing The Rs507 Hands-Fee Imager; Figure 98: Rs507 Bluetooth Hid Bar Code - Motorola TC55CH User Manual

118 | Wireless
6
8
Enter

Pairing the RS507 Hands-Fee Imager

An RS507 Hands-free Imager can be used with the device to capture bar code data.
Procedure:
1 Ensure that Bluetooth is enabled on both devices.
2 Ensure that the Bluetooth device to discover is in discoverable mode.
3 Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4 Place the RS507 in Human Interface Device (HID) mode. If the RS507 is already in HID mode, skip to step 5.
a Remove the battery from the RS507.
b Press and hold the Restore key.
c Install the battery onto the RS507.
d Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green.
e Scan the bar code below to place the RS507 in HID mode.

Figure 98: RS507 Bluetooth HID Bar Code

5 Touch
.
6 Touch
.
7 Touch
Bluetooth.
8 Touch SCAN FOR DEVICES. The device begins searching for discoverable Bluetooth devices in the area and
displays them under AVAILABLE DEVICES.
Send Feedback | February 2014 | MN000xxxA01
5
7
9