Rans N512DT Text Manual page 17

RANS S-21 OUTBOUND
LUBRICANTS, ADHESIVES, TAPES & ETC
Small Can Lithium Grease
WD40
Lubricating oil
DOW 730 Sealant, PRC or similar
3M 2216 Adhesive (4 oz.)
Thread Sealant
Safety Wire (.032 dia.)
Plastic Tape (anti-chafe)
Adhesive backed Velcro
White Lightning Bike Chain Lube or similar
Adhesive - ABS or PVC Glue
1/2" X 3/32" Black Foam Tape
DRILL BIT SIZES
A full set of fractional drill bits ranging from 3/32" to 5/8" is strongly recommended.
In addition to these, the following numbered and fractional bits will be required to
assemble your S-21 OUTBOUND.
NUMBERED BITS
#40
#30 both standard length and (1) 12" long
#28
#27
#21 & 10-32 TAP
#20
#11
OTHER SUPPLIES
1-1/4" diameter x 7 ft Tube (Aluminum or PVC)
1-7/8" to 2" diameter x 7 ft Tube (Aluminum or PVC)
1" diameter x 1" wood dowel
100-degree countersink for 3/16" diameter
100-degree countersink for 1/8" diameter
100-degree countersink for 3/8" diameter
120-degree countersink for 1/8" diameter
TEXT MANUAL
Clear Silicone
Super Glue
Loctite Blue Thread locker
3M Super 77 Spray Adhesive
PRO-SEAL 890-B2 Sealant
1/4" wide Double Stick Tape
Hi-Temp Silicone Seal (RED) Clear
1" Acrylic Foam Tape (2-sided)
Masking Tape
Lexan (Polycarbonate)
Slow-setting Epoxy
1/2" 3M VHB Tape
FRACTIONAL BITS
11/64"
.249"
1/4"
5/16"
3/8"
7/16"
1/2"
7/8"
7/16" 12" long
3/8" 12" long
09/11/2018
16