Error Indicators; Environmental Protection; Disposing Of Old Electrical Devices; Manner - Hanseatic WQP8-T7736E User Manual

Error indicators

Code
E1 :
It takes too long for the
water to fill up.
E3
:
The heating element is
defective.
E4
:
Water overflow
E8 :
Internal fault
ED
:
Internal fault

Environmental protection

Disposing of old electrical
devices in an environmentally
friendly manner
Electrical appliances contain harm-
ful substances as well as valuable
resources.
Every consumer is therefore re-
quired by law to dispose of old electrical ap-
pliances at an authorised collection or return
point. They will thus be made available for
environmentally-sound, resource-saving re-
cycling.
You can dispose of old electrical appliances
free of charge at your local recycling centre.
Please contact your dealer directly for more
information about this topic.
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see „Con-
necting the inlet hose" on page EN-24).
Ensure that the water pressure is correct. See „Technical spacifi-
cations" on page EN-35.
Have the appliance checked and repaired.
Switch off the tap. Find the gap in the seal (or have someone find
it) and repair the leak (or have it repaired).
Have the appliance checked and repaired.
Have the appliance checked and repaired.

Packaging

– Outer packaging made of cardboard
– Moulded parts made of foamed, CFC-free
– Films and bags made of polyethylene (PE)
– Tension bands made of polypropylene (PP)
– Saving energy also protects against exces-
Please dispose of packaging in an environ-
mentally friendly manner.
Environmental protection
Our packaging is made from envi-
ronmentally friendly, recyclable ma-
terials:
polystyrene (PS)
sive global warming. Your new appliance
uses little energy due to its modern tech-
nology.
Page EN-33