Adjusting The Picture Automatically (Computer Input) - Toshiba TLP-MT7E Owner's Manual

Adjusting the picture automatically (Computer input)

Control panel
(Main unit side)
Remote control
AUTO
SET
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL/ADJ
ENTER EXIT
CT-90072
You can adjust the optimum horizontal position, vertical position, sampling phase and
sampling frequency for projecting computer's signals at the touch of a button.
1
AUTO AUTO
KEYSTONE SET
2
VOL/ADJ.
ENTER EXIT
Notes
• Automatic adjustment may not be performed properly for signals other than the computer's
MENU INPUT
signals with which the projector is compatible
• The horizontal position, vertical position, sampling phase and sampling frequency can also be
ON/STANDBY
adjusted from the menu screen
TEMP LAMP ON
BUSY FAN * Sampling frequency
Analog RGB signals input from the computer are converted into digital signals inside the
projector. The sampling frequency is the number of times per second the analog signals are
converted into digital signals. In order to capture (sample) each individual dot of the
computer's signals, the sampling frequency must be adjusted to match the computer's dot
clock frequency. If this adjustment is off, details of the image may be blurred, a striped pattern
may appear when images with many vertical lines are displayed, or the image's width may
change. For computer's signals with which the projector is compatible, the sampling frequency
is adjusted automatically even without pressing the AUTO SET button.
* Sampling phase
The sampling phase is the timing at which the computer's analog RGB signals are sampled. If
the sampling phase is off, the individual dots cannot be sampled at the proper timing,
resulting in blurred or flickering images.
Input full screen video signals from the input
source (computer) and project the image.
Adjustments may not be performed properly for images that
are not displayed on the entire screen or extremely dark
images.
AUTO Press AUTO SET.
SET
The horizontal position, vertical position, sampling phase and
sampling frequency are adjusted automatically.
SET
The icon appears during signal processing.
.
44
.
73
33