Adjusting The Picture Automatically; Auto Set Button; Contents - Toshiba TLP-X10U Owner's Manual

Adjusting the picture automatically

Control panel
Remote control
(Main unit side)
INPUT ON/STANDBY
AUTO
LASER
SET
AUTO
KEYSTONE SET
L-CLICK R-CLICK
VOLUME/ADJUST
MENU ENTER EXIT
PIP FREEZE
RESIZE
CALL MUTE
You can adjust the optimum horizontal position, vertical position, sampling phase and
sampling frequency for projecting RGB signals at the touch of a button.
1
AUTO AUTO
2
KEYSTONE SET
VOL/ADJ.
ENTER EXIT Notes
• Automatic adjustment may not be performed properly for signals other than the RGB signals
MENU INPUT
with which the projector is compatible
• The horizontal position, vertical position, sampling phase and sampling frequency can also be
ON/STANDBY
adjusted from the menu screen
TEMP LAMP ON
* Sampling frequency
BUSY FAN Analog RGB signals input from the computer are converted into digital signals inside the
projector. The sampling frequency is the number of times per second the analog signals are
converted into digital signals. In order to capture (sample) each individual dot of the
computer's signals, the sampling frequency must be adjusted to match the computer's dot
clock frequency. If this adjustment is off, details of the image may be blurred, a striped pattern
may appear when images with many vertical lines are displayed, or the image's width may
change. For RGB signals with which the projector is compatible, the sampling frequency is
adjusted automatically even without pressing the AUTO SET button.
* Sampling phase
The sampling phase is the timing at which the computer's analog RGB signals are sampled. If
the sampling phase is off, the individual dots cannot be sampled at the proper timing, resulting
in blurred or flickering images.
Input full screen video signals from the input
source (computer) and project the image.
Adjustments may not be performed properly for images that are
not displayed on the entire screen or extremely dark images.
AUTO
Press AUTO SET.
SET
The horizontal position, vertical position, sampling phase and
sampling frequency are adjusted automatically.
The icon appears during signal processing.
SET
91
.
.
54
32

CONTENTS