Using handy features
Using auto setting (Only for computer input)
This function automatically sets up the projector to the optimum state such
as sampling phase, frequency and screen position for each type of the input
signal by using simple operations.
Press the AUTO SET button on the remote control.
For computer input, the
Note
•
The image may not be projected or auto adjustment/setting may not be performed
correctly for input signals other than those supported by the projector
Correcting the keystone distortion
When the projector placement angle against the screen is changed while
projecting the image, the picture will undergo keystone (trapezoidal)
distortion. This projector can correct for this keystone distortion.
Press the remote control's KEYSTONE + / - button.
You can also select [Keystone] in the Image adjustment menu
Note
•
Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector's images and sound can be turned
off.
Press the remote control's MUTE button.
The picture and sound are cut off. (The Mute function is released when
pressing the MUTE button again.)
Note
•
The icon
•
Operating any other functions will also cancel the muting.
Downloaded from
www.Manualslib.com
icon will appear during processing.
Before correctIon
will appear while mute is in effect.
manuals search engine
After correction
31
Remote Control
,
p.49
p.50
Remote Control
.
p.34
Remote Control