Toshiba TLP-B2E Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Projector
  5. TLP-B2E
  6. Owner's manual
Toshiba TLP-B2E Owner's Manual

Toshiba TLP-B2E Owner's Manual

3lcd data projector
Hide thumbs Also See for TLP-B2E:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
1
OWNER'S MANUAL
3LCD DATA PROJECTOR
TLP-B2E

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TLP-B2E

Summary of Contents for Toshiba TLP-B2E

  • Page 1 CONTENTS OWNER’S MANUAL 3LCD DATA PROJECTOR TLP-B2E...

  • Page 2: Before Calling Service Personal

    Before calling service personal CONTENTS Check the following points before asking for support service. Refer also to “Trouble indications”. Symptom Cause Correction Page The power does not come on. • The power cord is disconnected. Firmly plug in the power cord. •...

  • Page 3: Signal Assignment For Rgb Input

    Signal assignment for RGB input CONTENTS Pin arrangements Pin No. Video input (Red) Video input (Green) Video input (Blue) D-SUB 15 pin shrinking terminal GND (Red) GND (Green) GND (Blue) Input Signal SDA (DDC2B) Video signal Horizontal synchronizing/ Analog 0.7V(p-p) 75Ω...

  • Page 4: Applicable Rgb Signal

    Applicable RGB signal CONTENTS The unit is applicable to the following signals. However, some computers may have different Video Timing (Vertical) Video Timing (Horizontal) timings than those in the chart. Make the necessary adjustments if the picture has flickers or is blurred. Video Video Hor Sync...

  • Page 5: Controlling The Projector By Using Rs-232C

    Controlling the projector by using RS-232C CONTENTS Conditioning of the Projection Unit can also be done by a computer Command list via the RS-232C, as well as by the remote control. Classification Command Meaning Pin No. Signal Meaning Remote control/Key Power (Off) Receiving data Remote control/Key...
  • Page 6 Default setting Start up display (Off) Signal setting Video mode (NTSC4.43) (NTSC/60/4.43) Default setting Power on (Manual) Signal setting No signal background (TOSHIBA logo) Default setting Power on (Auto) Signal setting No signal background (Blue background) Data setting Status display (Display)

  • Page 7: Specifications

    Specifications CONTENTS Main unit Liquid crystal display Power requirements AC 100 – 240V 50/60Hz Projection system 3-panels transmission Power consumption 180W Panel size 0.9 inches Mass 2.6Kg Driving system TFT active matrix Dimensions 232 x 71 x 276 (mm) (W/H/D) Picture elements 786,432 pixels (1024 x 768 dots) x 3 (Except the protrusion parts)
  • Page 8 Specifications (Continued) CONTENTS Accessories Wireless remote control .......... 1 Coin shaped battery (CR2025) (Contained in the remote control) ......1 Power cord .............. 2 RGB cable ............1 (3m) Adapter for Macintosh computers ......1 Video cable ............ 1 (3m) Audio cable (Computer) .........

Table of Contents