Toshiba TLP-MT7E Owner's Manual page 56

56
FULL MENU settings – Display (continued)
Remote control
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL/ADJ
4-b
5
ENTER EXIT
CT-90072
When selecting setting items other than "Language" in step 3.
4-b
Control panel
(Main unit side)
AUTO AUTO
KEYSTONE SET
VOL/ADJ.
4-b
ENTER EXIT
5
MENU INPUT
ON/STANDBY
TEMP LAMP ON
BUSY FAN
• If the power is turned off by pressing the ON/STANDBY button, the settings made are
• The "Display" settings are applied to all the input sources. (It is impossible to store different
Press VOL/ADJ (+/-) to adjust and set.
No signal background (Setting of screen of no signal input)
Logo:
Blue background: The entire screen is blue.
None:
Icon
When set to "Off", the icons displayed normally when the input is
changed or other operations are performed, are no longer displayed.
Menu position
Select the position where the menu is displayed ("Upper left", "Upper
right", "Bottom left" or "Bottom right").
Menu background translucent
When set to "On", the menu background becomes translucent.
Start-up screen
When set to "On", the opening screen is displayed when the power is
turned on.
5
After the settings are finished, press EXIT.
EXIT
The menu screen disappears.
EXIT
Notes
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs
while the projector is on, the settings are not stored in the memory.
settings for each input source.)
The TOSHIBA logo screen is displayed.
The screen is black.