Correcting The Keystone Distortion - Toshiba TLP-MT7E Owner's Manual

Correcting the keystone distortion

Control panel
Remote control
(Main unit side)
AUTO
KEYSTONE
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL/ADJ
ENTER
EXIT
CT-90072
A picture may be expanded on the upper side if projected upward from the projector lifted
up by the foot adjuster. The projector can correct this keystone distortion automatically.
AUTO AUTO
KEYSTONE SET
VOL/ADJ.
KEYSTONE
KEYSTONE
ENTER EXIT
INPUT
MENU
ON/STANDBY
TEMP LAMP ON
Notes
BUSY FAN
• Due to digital correction processing, some of the information may dropped or the picture
quality may be degraded depending on the keystone correction setting or the contents of the
signal source.
• Keystone distortion is not corrected properly when the screen is not installed vertically. In this
case, adjust from the menu screen.
Before correcting
AUTO Press AUTO KEYSTONE.
The keystone distortion on the picture projected is
automatically corrected.
The icon appears while the keystone correction is
executing.
To correct further, make the "Keystone" adjustment on the
menu.
38 52
After correcting
Even if the projector is set
horizontal, keystone distortion
may occur if the screen is at
an angle. In this case
automatic correction is
impossible.
29