Angelcare AC117 Owner's Manual page 14

STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare
®
customize your settings to your preference.
5.1 - MENU ACCESS AND CHANGING THE SETTINGS
The MENU settings are accessed by pressing and HOLD the MENU button on the Parent
Unit. The MENU functions are in a loop. Each time you press the OK button briefly you
move on to the next MENU function. The MENU functions are in the following order
PRESS AND HOLD: Movement & ''TIC" ......................................... STEP 5.2
PRESS 1 TIME: Sound .......................................................... STEP 5.5
PRESS 2 TIMES: Sound Transmission (VOX) ................................... STEP 5.6
PRESS 4 TIMES: Temperature ................................................. STEP 5.7
NOTE:
By continuing to press the OK button you will be continuously moving through the loop.
Once you have selected your preferred settings you must press EXIT MENU or your
changes will not be saved.
5.2 - SETTING THE SENSOR PAD
SET THE MOVEMENT DETECTION
Allows you to detect the baby's movements.
1
3
14
monitor can be used with the pre-program factory settings or you can also
All changes and
adjustments made in
the main menu will not
be activated unless you
confirm them by pressing
the EXIT button.
2
IMPORTANT
When in MENU mode, sound
transmission between Parent and
Nursery Units will be temporarily
deactivated.
1) Press and HOLD the MENU button till
the Movement monitoring icon blinks.
The movement monitoring
icon will blinks.
2) Use the UP and DOWN arrows to
activate or deactivate movement
detection.
3) Press the OK button to confirm
your choice.