Led Status - Bosch NDE-8502-R Installation Manual

30 en | Hardware installation
4.
Notice!
i
Use full size SD cards for maximum reliability, and to eliminate the risk of bad connections in
a microSD to full size SD adapter. Bosch recommends the use of industrial SD cards with
health monitoring.
6.4

LED status

A status LED can be seen in the camera bubble on the opposite side of the camera lens.
Refer to the table below for the different status LED functions.
Status LED
Solid red
Flashing red
Solid green
Flashing green
Disable the status LED in the camera settings, if necessary.
1.
2.
3.
2021-02 | V02 | F.01U.385.211
Make sure that all necessary wiring is done, and that energy is being supplied.
Select Camera.
Select Installer menu.
Select Disabled in Camera LED.
Meaning
Booting
Resetting
Working, but stream is not being watched or
recorded
Stream is being watched and/or recorded
Installation manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems B.V.