L2 Features > Vlan > Management Vlan - D-Link DGS-1100-05 User Manual

4 Configuration
Select Enabled and click Apply to enable the Port-Based VLAN function and the following will be displayed:
Click Rename to rename the VLAN group.
Click Delete to remove the VLAN group.
To create a new Port-Based VLAN group, click Add VLAN and the following will be displayed:
Enter the VLAN Name and select the Member port to be created.
Click Apply to make the configurations take effect.
Click Cancel to discard any changed made and return to the previous page.
L2 Features > VLAN > Management VLAN
The 802.1Q Management VLAN setting allows user to transfer management authority of the switch from the
default VLAN to another VLAN. This allows for more flexible network management. By default, the
Management VLAN is disabled. You can select any existing VLAN as the management VLAN when this
function is enabled. There can only be one management VLAN at a time.
Figure 4.31 – L2 Features > VLAN > Port-Based VLAN
Figure 4.32 – L2 Features > VLAN > Port-Based VLAN - Enabled
NOTE: When Port-Based VLAN is enabled, the
802.1Q VLAN settings and 802.1Q management
VLAN settings will be set to Disabled by default.
By default, all ports are untagged.
Figure 4.33 – L2 Features > VLAN > Port-Based VLAN - Enabled
Figure 4.34 – L2 Features > VLAN > Management VLAN
D-Link Smart Managed Switch User Manual
26