Initial Setup - Ricoh MFSP213SFNW1 Manual

Initial Setup

MF
When you turn this machine on for the first time, you must set the following items. Select each setting
using the [ ], [ ], or number keys, and then press the [OK] key.
Display language
The selected language here is used for displaying messages, etc.
*3
Country
The selected country is used for configuring the settings related to fax transmissions with
appropriate default values for the country of use.
User fax number
The registered number is used as the fax number of the machine. The user fax number can contain
0 to 9, spaces, and "+".
*1
User name
The name entered here is used as the name of the fax sender.
Date/Time
The time and date entered here are used for the machine's internal clock.
*2 *3
Area
By selecting the area in which the machine is being used, you can narrow down the choice of
display language and other settings.
*1 This setting is only available with Type 3 and 4 models.
*2 This setting is only available with Type 1 and 2 models.
*3 This setting may not be available depending on the region in which the machine is being used.
opal-p2_mf2_com_user_guide_00142321_eng.xml
*1
Initial Setup
29
Draft 2014/01/07