Ricoh MFSP213SFNW1 Manual page 186

8. Configuring the Machine Using Utilities
Item
Wireless Signal Status
Wireless
Wireless LAN Settings
Item
SSID
Communication Mode
Ad-Hoc Channel
Authentication
Encryption
WPA Passphrase
WEP Key Length
WEP Transmit Key ID
WEP Key Format
WEP Key
186
Displays the strength of the wireless signal that is being received.
Specifies whether or not to use the wireless LAN.
Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
Select the mode to connect in.
If the machine will be connected to a wireless router or access point, select
[Infrastructure]. If the machine will be connected to a device equipped with
a wireless LAN directly, select [Ad-Hoc].
If [Ad-Hoc] is selected for [Communication Mode], select a channel.
Select an authentication method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[Open System] and [Shared Key].
Select an encryption method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[None] and [WEP].
If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
of the encryption key.
Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
Select a format for entering the WEP key.
Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
Description
Description
opal-p2_mf2_com_user_guide_00142137_eng.xml
Draft 2014/01/07