Configuring The Administrator Settings; Administrator Tab; Reset Settings Tab - Ricoh MFSP213SFNW1 Manual

Configuring the Administrator Settings

Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
MF
Setting], [Set Date/Time], and [Energy Saver Mode].
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
P
Setting], and [Help Source File Setting].

Administrator Tab

Administrator Settings
Item
Change
MF
Password
New Password
Confirm New Password Enter the same password again, to confirm.
Change E-mail
MF
Address
Administrator E-
MF
mail Address

Reset Settings Tab

Reset Settings
Item
Reset Network Settings
Reset Menu Settings
Clear Scan
MF
Destination
opal-p2_mf2_com_user_guide_00142140_eng.xml
Check this to configure the administrator password.
MF
Enter the new administrator password. Can contain up to 16 characters.
Check this to configure the administrator e-mail address.
MF
Enter the administrator e-mail address.
MF
If the machine's e-mail address is not configured in the [SMTP] page,
MF
this address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails. Can contain up to 64 characters.
Select to restore settings configured under the [Network Settings] and
[Administrator Tools].
Select to restore settings that are not related to the network to their defaults.
Select to clear the scan destinations.
MF
Configuring the Administrator Settings
Description
Description
193
Draft 2014/01/07