Table of Contents
Advertisement
D. Install Logs (LOGS-QUARTZ42)
Log Set Assembly: LOGS-QUARTZ42
Models: QUARTZ42IN, QUARTZ42IL
Install Logs
CAUTION: Logs are fragile, handle with care.
Log Identification:
Reference Figure 1 for identification of logs. It is important
to lay the logs out in order as shown in Figure 1. Some
logs are similar to others in shape or size so it is imperative
to correctly identify each log.
1
2
3
4
Figure 1. Log Identification
EMBERS
Figure 2. Log Pin and Glowing Ember Locations
62
Majestic • QUARTZ32, QUARTZ36, QUARTZ42 Installation Manual • 2412-980 Rev. Q • 3/19
5
6
7
8
LOG PINS
EMBERS NOT ALLOWED
IN SHADED AREA
1. Locate the five hand bend tabs on the base pan and
bend each tab up to 90 degrees. Note the locations of
the three log pins. See Figure 3.
HAND BEND TABS 5
LOG PINS 3
Figure 3. Hand Bend Tab and Log Pin Locations
2. LOG #1: Locate and install the Log #1 by installing the
right end of the log over the rear log pin. Then rotate
the left end of the log until it contacts the rear left hand
bend tab. See Figure 4.
REAR LEFT HAND BEND TAB
1
Figure 4. Install Log #1
LOG PLACEMENT
INSTRUCTIONS
Advertisement
Table of Contents
