User Authentication and Accounting (User Login, Job Accounting) > Setting an Account
Editing an Account
1
2
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2235dn/ECOSYS M2735dn
2
[▲] [▼] key > [Job Account.Set.] > [OK] key > [▲] [▼] key > [Account. List] > [OK] key
Edit an account.
1
Select the account you want to change and select the [OK] key.
NOTE
The account information can be changed by selecting [Menu], selecting [Detail/Edit] and
then selecting the [OK] key.
2
Refer to step 2 of "Adding an Account" and "Restricting the Use of the Machine" to change
account information.
Adding an Account (page 9-26)
Restricting the Use of the Machine (page 9-28)
3
[OK] key > [Yes]
The account information is changed.
Login User Name
3500
9-29
Login Password
3500