Kyocera ECOSYS M2235dn Operation Manual page 242

Setup and Registration (System Menu) > System Menu
Item
IPv6 Setting
IPv6 Setting
Manual Settings
RA(Stateless)
DHCPv6 Settings
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Bonjour
Item
Protocol Setting
IPSec
Item
IPSec
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [Link Local] after restarting the network.
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address 1 (to 5)] after restarting the network.
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address] after restarting the network.
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
Select whether to use Bonjour.
Value: Off, On
Make this setting when you use IPSec.
Value: Off, On
NOTE
If [Bonjour] is set to [ON], set [Rule Setting].
Description
Description
Description
8-8